Merlin GDPX+ Oxygen System

The MerlinGDPX+ is a 16 zone detection panel. Up to 16 detectors can be used in any combination and can be individually monitored on the TFT display.

The MerlinGDPX+ is a gas detection panel designed by American Gas Safety (AGS) to be used with AGSO2TFT detectors. It is intended for use in spaces that require oxygen depletion or enrichment detection and provides features such as fan control options, alarm damper control, and connectivity to Building Management Systems (BMS). The GDPX+ is a compact and versatile solution for gas detection for various applications, providing comprehensive features to meet the requirements and guidelines for oxygen depletion/enrichment.

Visit our design ideas tab for the most popular solutions.

AGS Oxygen Gas Detectors

The AGSO2TFT is an oxygen depletion/enrichment electrochemical detector and is typically used as a standalone unit or in conjunction with an AGS controller. Oxygen detectors should be mounted 3-5ft from the ceiling of the protected area. At detection, the detectors will go into alarm at either >18.5% V/V or <23% V/V. When connected to an AGS controller, built-in alarm relay outputs can be used to activate the power supply to a remote audible alarm, activate ventilation fans or shutdown equipment. This can then be rectified by resolving the leak, allowing the sensor head to clear and resetting the attached AGS panel and detector.

For further information on our Merlin gas detectors please refer to our product data sheet.

AGS Audible Alarm Strobe

• Alarm/siren offers 32 selectable sounds and volume control.
• Include high intensity LEDs.
• 8 flash patterns.
• Typical working properties of polycarbonate are -40˚ to 250˚F (-40˚C to 121˚C).
• Three year guarantee against breakage of polycarbonate in normal use
  (one year on electro mechanical and electronic components).
• Designed to meet the requirements of IP54.

For further information on our audible alarm strobes please refer to our product data sheet.